Oracal 651 vinyl is a PVC film vinyl that is 70 microns thick and features a solvent polyacrylate adhesive which allows for permanent adhesion onto a variety of surfaces including: glass, acrylic, wood, paper, metal, glazed ceramics, card and smooth plastics.
This is perfect for cutting on most vinyl cutters and plotters including Cricut, Brother and Silhouette. The vinyl is supplied on a backing sheet and needs to be applied to the required surface with a clear self-adhesive transfer sheet.
This vinyl is easy to weed and is the same colour on both sides so it can be reversed on surfaces, allowing it to be viewed from both sides, great for glass and acrylic applications.
This vinyl is outdoor quality and has a life span of up to 5 years in outdoor settings, making it great for car stickers, decals and outdoor signs.It can also be used for a variety of craft applications including: water bottles, mugs, picture frames, mirrors, acrylic decoration, labelling pantry or office storage items.
- Easy to weed and perfect for home craft use
- Great for permanent applications
- High gloss finish
- Same colour on both sides so application can be reversed
- Suitable for indoor and outdoor use, has a long life span and is scratch and water resistant
- Large quantities of vinyl will be supplied in 5m lengths
Please note that if this vinyl is applied to mugs and drink bottles, it must be hand washed only as the heat from the dishwasher may damage the film and cause the adhesive to fail.
Let the design set for 24 hours before washing.
If you require a larger size, please contact us as this can be arranged.
Please note that actual vinyl supplied may not match the colour sample on the website exactly due to screen resolutions etc. If you require an exact match, please order either a sample or a colour sample card.
Oracal 651 - Permanent Gloss Vinyl - Greens
-
Lay the vinyl sheet backing side down on your cutter mat.
Cut your design and remove from the cutting mat.
Weed the design to remove unwanted vinyl. This should be done with a weeding tool. A light box may make it easier to see the design and allow for easier weeding.
Apply your transfer tape to the front of your design and use a scraper to make sure the design has adhered to the tape.
Ensure your application surface has been thoroughly clean and is free from dust, grease and any residue or contamination that could affect the adhesion of the vinyl.
Place the design sticky side down onto the surface and scrape well with your scraper to ensure it has good adhesion. If you lay the vinyl down in one spot first and roll it down as you scrape it will help to avoid any trapped air bubbles, making for a smooth finish.
Carefully remove your transfer tape and store for later use.
Admire your project.
-
12 x 12 Inch = 30.5 x 30.5 cm = 305 x 305 mm
12 x 24 Inch = 30.5 x 61 cm = 305 x 610 mm